quartz / cut to size CARE & MAINTENANCE

Virtually Ersten surfaces maintenance is free，our quartz products are hard，non-porous surfaces are simply to clean and no need to seal to keep the lustre. In most care of daily，you just need use the water and soap or a mild neutral agent is enough to keep your Ersten surfaces look likes new.

But to protect your countertop surfaces you must note that avoid exposing your quartz surface to chemicals and solvents, especially paint removers or furniture strippers that might contain trichlorethane or methylene chloride. Keep solvents, nail polish removers, acetone alcohol, thinners, detergents containing bleach, laundry bluing, highly alkaline liquids such as bleach, caustic soda or oven cleaners, acids, oily soaps, descalers, markers or ink, abrasive and micro-abrasive detergents, away from the surface. If any of the substances listed above come into contact with your quartz surface, rinse the exposed surface immediately and thoroughly with plenty of clean water.

It is best to avoid the exposure of UV rays on your quartz surface to protect the surface from any possible change in the color over time.

On the other hand，Ersten quartz surfaces is high resistant material，but we always recommend our customer to set hot skillets, pans, crock pots, griddles, electric skillets and any type of electric cooker on hot pads or trivets, not directly on the quartz surface. This is recommended, to prevent the slab from cracking due to the heat.

solid surfaces CARE & MAINTENANCE

Warm soapy water, ammonia-based cleaners or commercially available solid surface cleaners will remove most dirt and residue from all types of finishes. Avoid window cleaners, however, as they can leave a waxy build-up that dulls the surface. Experience has shown that a film builds up on the surface if water is left to dry on the countertop. This film will dull the look of the countertop making the finish appear blotchy and uneven. To prevent buildup of the film, it is very important to wipe the countertop completely dry after spills and cleaning. Some solid surfaces colors may require more frequent cleaning to maintain a uniform finish. Darker colors tend to require more attention than lighter colors. Over time, even with proper care, your countertop will acquire a patina, changing the appearance of the finish.

quartz sink & basin MAINTENANCE

Most dirt and stains: Wipe with a damp cotton cloth/sponge and soapy water. Towel dry with a cotton cloth.

It is recommended that you clean your sink prior to first use.

Stubborn stains and water marks: Wipe with a Mr. Clean® Magic Eraser® and either water or a 50/50 white vinegar and water solution. Towel dry with a cotton cloth.

Difficult stains: Use a 3M Scotch-Brite™ Heavy Duty Scour Pad with either water, 50/50 white vinegar/water solution or non-abrasive cleaner. Start cleaning in a a circular motion with constant pressure over the area of the stain, rinse thoroughly with water and dry with a cotton cloth. Let dry 5-10 minutes. If stain persists, repeat.

Run cold water when pouring boiling water into sink.